共搜索到3496条信息,每页显示10条信息,共350页。用时:0小时0分1秒359毫秒
is closely related to the quality of recycled asphalt pavement. To avoid aggregate degradation, the asphalt is melt and its viscosity is reduced before complete scarifying and/or milling process [7......
positions, which leads to circumflex areas having a priority to melt and yield narrow necks. Then, these frail necks are inclined to pinch-off from the parent stem to exhibit a fine and isotropic grains......
, and melting was conducted at 700-750 °C in an electric resistance furnace under the protection of CO2 (99 vol.%) and SF6 (1 vol.%). The melt was stirred and held for about 15 min and cast......
diameter of 35 mm. Although Al2O3 is easy to melt in cryolite, the experimental temperature has not reached this temperature. The Al2O3 content in the corundum crucible used is more than 99%, and its......
of China, 2012, 22(3): 555-563. [28] JIANG Ju-fu, WANG Ying, DU Zhi-ming, LUO Shou-jing. Microstructure and properties of AZ80 alloy semisolid billets fabricated by new strain induced melt activated......
is more than 6×10-6. It is noted that hydrogen concentration of mechanical specimens in this paper is obtained by melt extraction at high temperature (about 2000 °C), which is different with the TDS......
of the molten alloy, the vertical gate was opened and the melt entered the cooling jacket. Fig. 1 Representative diagrams of simultaneous continuous casting and rolling device for making 7075 Al plates......
appears at wf/cy of 0.2:1-0.5:1. According to the macrostructures of the clinker, it is considered that Na2CO3 reacts with Fe2O3 in the melt. 3.4.2 Heating temperature The effect of temperature......
search into the AM of Ti-TiB composite scaffolds/lattices has been conducted [16, 17]. For melt-based AM of Ti-TiB, there are three major challenges: 1) restrictions in the sizes and shapes of powders and lack of available composite feedstocks suitable for AM; 2) changes in the melt behavior of the composite caused by ceramic reinforcement, making powder bed fusion challenging [18]; and 3) highly......
be higher than the Fe melting point of 1535 °C. In this case, Zn metal would be gasified owing to its low gasification point (907 °C). Thus, we determined to partially melt the Fe-Zn powder by optimizing......