共搜索到3846条信息，每页显示10条信息，共385页。用时：0小时0分0秒581毫秒
/Al composite parts with complex shape can be produced successfully by combination of powder injection molding (PIM) for SiC preform preparation and aluminum pressureless infiltration. The effect of sintering process on open porosity and strength of SiC preform was researched, and the thermo-physical characteristics of final composites were also evaluated. The results show that the best sintering......
Pressureless infiltration processing and thermal properties of SiCp/Al composites with high SiC particle content ZHOU Xian-liang(周贤良), ZOU Ai-hua(邹爱华), HUA Xiao-zhen(华小珍), ZHANG Jian-yun(张建云..., SiCp/ZL101, SiCp/ZL102 composites with SiCp volume fraction of 55% were fabricated by pressureless infiltration. The microstructure was examined and thermal properties were characterized for SiCp/Al......
Effect of porosity on wear resistance of SiCp/Cu composites prepared by pressureless infiltration ZHANG Lin(章 林), QU Xuan-hui(曲选辉), DUAN Bo-hua(段柏华), HE Xin-bo(何新波), QIN Ming-li...; Abstract: The influence of porosity on the wear behavior of high volume fraction (61%) SiCp/Cu composite produced by pressureless infiltration was studied using a sliding, reciprocating......
spontaneous infiltration, a TiO2 to Al blending ratio around 3:7 in volume and an infiltration temperature around 900 °C are the most suitable. Key words: spontaneous infiltration; pressureless sintering... placed and sealed into 6060 aluminum molds for further pressureless infiltration treatment, while the d10 mm preforms were used for pressureless sintering treatment as comparison. In the pressureless......
by pressureless infiltration method. The porous ceramics skeleton preforms were prepared by pre-sintering at 1800 °C for 2 h under argon condition, and the B4C porous ceramics preforms were infiltrated by molten... comprehensive mechanical properties. References [1] MASHHADI M, EHSAN T N, VINCENZO M S. Pressureless sintering of boron carbide [J]. Ceramics International, 2010, 36: 151-159. [2] MIYAZAKI H, ZHOU Y, HYUGA H......
respectively by 25.7%, 51.5% and 24.4% than those of pure MoSi2 sample. Therefore, the optimal content of CNTs is 6% in volume fraction. Compared with CNTs/MoSi2 composites by vacuum pressureless sintering...J. Cent. South Univ. (2016) 23: 3060-3064 DOI: 10.1007/s11771-016-3369-5 Properties of CNTs/MoSi2 composites prepared by spark plasma sintering ZHANG Yong(张勇)1, 2, ZHANG Hou-an(张厚安)1, 2, WU He-jian......
......
时在裂纹延伸过程中发生偏转,断裂模式多为穿晶断裂,较少为沿晶断裂. 关键词:ZrB_2-SiC; 常压烧结; 力学性能; 显微结构; ZrB_2-SiC; pressureless sintering; mechanical properties; microstructure; [全文内容正在添加中] ......
Sintering and Phase Transformation of 7wt% Calcia-stabilized Zirconia Ceramics陈常连State Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology摘 要:Calcia stabilized zirconia(CSZ) ceramics were prepared with 7wt% calcia-stabilized zirconia powder by pressureless sintering technology. The crystal phases......
by the superposition effect of thermal wave. Vacancy concentration differences were improved during FAST compared with hot-pressure and pressureless sintering, thereby decreasing the sintering time...Thermal Wave Effect and Sintering Activation Energy at the Initial Stage of Field Assisted Sintering Process for Non-conductive Al2O3 Powders张龙1,2,ZHANG Xiaomin2,ZHENG Hengwei11. Department......
