共搜索到3699条信息,每页显示10条信息,共370页。用时:0小时0分0秒484毫秒
the rapid solidification process of amorphous ribbons prepared by melt spinning was approximately modeled by one-dimensional heat conduction equation. Besides, integration with the temperature... the cooling rates of aluminum amorphous ribbons. According to the above theoretical model, the critical cooling rate of aluminum amorphous ribbons by melt spinning is above 106 K/s, which proves......
–xCexMgNi3.5Mn0.5 (x=0, 0.1, 0.2, 0.3, 0.4) alloys, and melt spinning technology was adopted to fabricate the alloys. The identification of XRD and SEM reveals that the experimental alloys consist... with spinning rate growing. Key words: Ni-MH battery; hydrogen storage; melt spinning; discharge capacity; kinetics 1 Introduction Recently, an authoritative survey report from the Ministry......
......
and magnetic properties of alloy ribbons. The optimum magnetic properties of bonded magnets are achieved by melt spinning at 24 m*s-1 wheel surface speed, annealing at 655 ℃ for 10 min, and bonding... words:metal materials; permanent magnet; Pr-based bonded magnets; melt spinning; magnetic properties; rare earths; [全文内容正在添加中] ......
by gas atomization, melt spinning and strip casting respectively were outlined.The advantages, disadvantages and research development of the above methods for preparing hydrogen storage alloys were... alloys is presented specially. Key words:hydrogen storage alloys; gas atomization; melt spinning; strip casting; rare earths; [全文内容正在添加中] ......
Al-8.5Fe-1.3V-1.7Si合金旋压管材, 力学性能明显提高, 材料各向异性有所减弱. 关键词: 喷射沉积; 耐热铝合金; 强力旋压 中图分类号:TG146.2 文献标识码:A 文章编号: 1672-7207(2005)03-0358-06 Effects of shear spinning process on microstructures and mechanicalproperties... into thin-wall pipes through hot backward shear spinning process. The effect of shear spinning process on microstructures and mechanical properties of extruded pipes of spray deposited......
, 0.15, 0.2) alloys were prepared via melt spinning. The analyses of the X-ray diffraction (XRD) and scanning electron microscopy (SEM) proved that the experimental alloys contain the main phase LaMgNi4... and melt spinning make the life-span of the alloys improved remarkably, which is attributed to the improvement of anti-oxidation, anti-pulverization and anti-corrosion abilities. In addition, the discharge......
Characteristics Study on Bi-Pb Based Alloys Quenched from MeltRizk Mostafa Shalaby摘 要:Three different bismuth-lead systems namely,Wood’s alloy(Bi50Pb25Sn12.5Cd12.5),Newton’s alloy(Bi50Pb31.2Sn18.8) and Rose’s alloy(Bi50Pb28Sn22),with one used as fusible alloys were quenched from melt by melt spinning technique.Thermal analysis,structure and mechanical......
University, Xi’an, 710049, China) Abstract: Al70-xSi30Mnx(x=0, 3, 7, mole fraction, %) ribbons were prepared by melt spinning. The differential scanning calorimetry (DSC) curves of the ribbons were... with as-quenched ribbons. Key words: Al-Si-Mn alloys; melt spinning; ageing; electrochemical property 在商用锂离子电池中,石墨由于其具有优异的充放电循环性能而被广泛使用,但由于其质量比容量很低,限制了电池容量的提高[1].研究表明,Si,Sn,Sb等金属或类金属可得到比石墨高得多的比容  ......
Structure and properties of nanostructured Cu-13.2Al-5.1Ni shape memory alloy produced by melt spinning M. IZADINIA, K. DEHGHANI, H. MOHAMADI Department of Mining and Metallurgical... memory alloy (SMA) were compared with those of initial coarse structure. The nanostructured Cu-Al-Ni ribbons were produced via rapid solidification using melt spinning technique. The structure......