共搜索到4250条信息，每页显示10条信息，共425页。用时：0小时0分0秒735毫秒
-shan (National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao 066004, China) Abstract: The influence of vibration parameters in the new......
, respectively. The tests were repeated at least three times under the same conditions. Before each test, the specimens were rinsed ultrasonically in distilled water and immersed in acetone and cold......
until complete evaporation of the solution. 2.2 Composite preparation The toroidal cores with an outer diameter of 26.1 mm, an inner diameter of 18.1 mm and a height of 4.5 mm were fabricated at a cold......
. HUANG Bing-min, CAI Wei, ZHAO Wei, et al. The effect of heat-treatment and cold deformation on non-linear superelasticity of Ti-Ni alloy[J]. Aerospace Materials & Technology, 1997(5): 24-28. [11] 司乃潮.... Two-stage R phase transformation in a cold-rolled and annealed Ti-50.6at%Ni alloy[J]. Scripta Mater, 2005, 52(8): 575-760. [18] SABURI T, TATSUMI T, NENNO S. Effect of heat treatment on mechanical......
Jin-chuan, GAO Yun, et al. Influence of cold deformation and Ti element on the microstructure and properties of Cu-Cr system alloys[J]. Journal of Materials Research, 2015, 30: 2073-2080. [11......
. [19] STEPANOV N, KUZNETSOV A, SALISHCHEV G, RAAB G, VALIEV R. Effect of cold rolling on microstructure and mechanical properties of copper subjected to ECAP with various numbers of passes [J......
-rolled sample), and then cold rolled to 1 mm (hereinafter called as cold-rolled sample). Table 1 Chemical compositions of Cu-0.4Be-xNi alloy (wt.%) [18] The rolled samples were conducted......
, 2008, 18: 266-270. (in Chinese) [29] ZHANG Xue-hui, LI Xiao-xian, LIU Wei-jiang, YANG Kai, ZHU Sheng-jian, JIANG Miao. Effect of cold deformation on microstructures and properties of Al2O3-dispersion......
. The reactive synthesis process of porous TiAl intermetallic was carried out by a powder metallurgy method including mixing, cold pressing and vacuum sintering. The mixing procedure of elemental powders......
;d, respectively. The samples were quenched in cold water at the end of treatment. In order to distinguish the alloys in different states, the as-cast alloys are denoted as "A", and the 1000 °C......
