共搜索到292条信息,每页显示10条信息,共30页。用时:0小时0分0秒190毫秒
......
等温变形对γ-TiAl合金微观组织的影响 黄朝晖1 (1.北京航空材料研究院,先进高温结构材料国防科技重点实验室,北京,100095) 摘要:通过等温压缩特性及微观组织演变研究,提出了有效的γ-TiAl基合金晶粒细化方法.研究发现,如果γ-TiAl合金锭具有一定的细晶组织便可以在(α2+γ)2相区完成等温变形而不产生裂纹.动态再结晶和静态球化数量的增加是提高γ-TiAl合金变形能力的主要原因.将等温变形的模拟锻件在不同相区进行热处理获得了具有细小尺寸的3种(全片层,近片层和双态)组织. 关键词:TiAl; 等温变形; 细化; 组织; titanium aluminide; isothermal deformation; refining; microstructure; [全文内容正在添加中] ......
at 1050℃.The result shows that the cyclic corrosion life of Pt/Ru-modified bond coating is longer than that of the conventional Pt-modified aluminide coating in the presence of NaCl plus water... aluminide coating.关键词:......
. Mixed fracture modes are operative at all temperatures. Key words: titanium aluminide; mechanical alloying; hot pressing; thermal treating; compressive properties 1 Introduction Ordered intermetallic... evolution and mechanical properties of a forged gamma titanium aluminide alloy [J]. Acta Metallurgica et Materialia, 1992, 40: 1121-1134. [9] DJANARATHANY S, SERVANT C, PENELLE R. Phase transformations......
......
was a three-layer structure. The first layer consisted of a solid solution of Cr and Fe in α aluminum and an intermetallic compound FeAl3, while the second layer was a single phase of the aluminide... for 576h revealed that the surface coatings of the specimen had transformed into a duplex structure containing an outer layer and a thicker aluminide layer beneath. X-ray diffraction results showed......
含铼单晶高温合金铝化物涂层的高温氧化行为 刘春廷1,孙晓峰1,管恒荣1 (1.中国科学院金属研究所,辽宁,沈阳,110015) 摘要:采用低压气相沉积法,在镍基高温合金DD32上制备铝化物涂层.涂层外层为β-NiAl,内层(扩散层)宽度接近外层,富集Re.在900℃,1000℃氧化500小时后,表面氧化膜为致密的α-Al2O3 和针状的θ-Al2O3,氧化动力学基本符合抛物线规律.氧化后的铝化物涂层外层为β-NiAl,有贫Al的Ni3Al沿晶界析出;内层(扩散层)母体为Ni3Al,并析出块状的富Re和W的化合物. 关键词:铝化物涂层; 高温氧化; 单晶高温合金; 铼; [全文内容正......
γ-TiAl增压涡轮熔模铸造过程数值模拟研究 仲增墉1,张继1,李俊涛1,柳百成2,梁作俭2,李世琼1,许庆彦2 (1.北京钢铁研究总院,北京,100081;2.清华大学,北京,100084) 摘要:根据熔模型壳离心浇注的铸造工艺特点,建立了γ-TiAl增压涡轮凝固传热过程的数值模型,推导了离心压力下γ-TiAl金属间化合物的凝固收缩和补缩过程数学模型,模拟计算了γ-TiAl增压涡轮铸件的温度场和收缩缺陷.结果表明,模型能可靠计算γ-TiAl增压涡轮铸件凝固过程的温度分布和准确预测铸件的收缩缺陷,数值模拟结果与实验结果吻合良好.数值模拟结果证实了前期工作所提出的进一步减少及消除收缩缺陷的......
......
......