共搜索到7806条信息,每页显示10条信息,共781页。用时:0小时0分0秒187毫秒
......
......
. The formation phases and interface structure of the joints were investigated by SEM, EPMA and XRD, and the joint strength was determined by the shear test method. Three formation phases, Ti(Cu, Al)2, Ag(s.s.) (Ag-based solid solution) and TiC, occurred in the brazing seam, and the interface structure of the joints can be expressed as TiAl/Ti(Cu, Al)2+Ag(s.s.)/Ag(s.s.)/TiC/steel, but TiC does not occur......
. Nonequilibrium growth of intermetallics at the interface of liquid-solid metal[J]. Acta Phys Chim, 200l, 17(5): 453?456. [11] Duan N, Scheer J, Bielen J. The influence of Sn-Cu-Ni(Au) and Sn-Au... is alloyed with Ni by forming intermetalics in the welding interface. Key words: Au-20.1Ag-2.5Si-2.5Ge; medium-temperature solder; wettability; welding interface  ......
THE INTERFACE OF TERNARY-BORIDE-BASED HARD CLADDING MATERIAL Y.G.Wang1,D.Zhang1,Z.Q.Li2 (1.State Key Laboratory of Metal Matrix Composites, Shanghai Jiaotong University, Shanghai 200030,China... the interface bonding well and bonding strength ideal at the interface. The results gotten by studying of crack produced by Vickers indentation technique in the interfacial zone show......
Article ID: 1003-6326(2005)02-0375-04 Interface evolution of TiAl/Ti6242 transient liquid phase joint using Ti, Cu foils as insert metals DUAN Hui-ping(段辉平)1, K. H. Bohm2, V. Ventzke2, (1... D-21502, Germany) Abstract: The interface evolution of TiAl/Ti6242 joint produced by transient liquid phase(TLP) bonding with Ti, Cu foils as insert metals was investigated. The results show......
expansion behavior are reported[10]. Moreover, the thermal expansion behaviors are also affected by the interface. Therefore, in this work, a research on interface and thermal expansion behaviors of Cf/Al... and the reinforcement. Fig.2 gives the interface of M40/6061Al composite and M40/5A06Al composite. The combination between Al alloy and fibers was well and no interfacial debonding was observed in two composites......
of the continuous oxide inclusion zone of Al, Zn and Cu at the interface, and C zone is composed of Zn-rich Al-based solid solution. In brief, the interface structure of joints bonded without vibration.... zone B is also mainly composed of the discontinuous oxide inclusion zone of Al, Zn and Cu in the interface. zone C is composed of α phase (i.e. Al-rich Al-base solid solution). Fig.2 Back......
......
......