共搜索到21169条信息,每页显示10条信息,共2117页。用时:0小时0分0秒421毫秒
Correlation between pass-through flux of cobalt target and microstructure and magnetic properties of sputtered thin filmsXiu-Lan Xu1,Qian-Ming Huang2,Guo-Nan Feng1,Gang Han1,Qi-Xun Guo1,Xiao-Dong...(PTFs).The influences of PTF on the magnetic properties of sputtered thin films were investigated.The results indicate that under the same sputtering conditions,cobalt thin film deposited by Co target......
Preparation and Characterization of Rare Earth Metal and Alloy Target Materials for Manufacturing Magneto-Optical Disks张志宏,邱巨峰,马志鸿,于雅樵摘 要:The studies were made on the preparation processes of the rare earth metal and alloy target materials and their characterization. In this work the rare earth metals were prepared by electrolysis of the oxide in molten......
One Improved Electroless Composite Plating Technique GU Jian1,Sun Wei-ming1,JIN Jia-shan1,GENG Jun-bao1 (1.Power Eng College, Naval University of Enginnering, Wuhan 430033, China) 摘要:The principium of Ni-PTFE electroless composite plating technique has been discussed and a new technique has been presented with improved compounding formula and optimized work condition, its technique parameters......
of the 3D-confinement on the performance of ceramic composite target against projectile, several kinds of ceramic composite targets were simulated. The anti-penetration performance of confinement...:A 文章编号:1672-7207(2011)11-3331-05 Effect of confinement mechanisms on performance of ceramic composite targets SUN Juan1, HUANG Xiao-zhong1, DU Zuo-juan1......
Effect of Particle Size on Target Sintering Behavior of Cubic ITO Nanopowders翟晓宇,Peng Xiang,Ma Yunqian,Liu Ting,刘家祥Beijing Key Laboratory of Electrochemical Process and Technology for Materials... equation of R=exp(-41.823 × d).When the particle size is 41.6 nm,the resistivity reaches the minimum value of 0.8 Ω·cm.The relative density of ITO target decreases with the increase of particle size.Fine......
1 000 ℃ as follows. 4Al +Si3N4→4AlN+Si Fig.3 XRD pattern (Cu was used as target) of infiltrated Si3N4 composite Fig.4 XRD pattern (Cu was used as target) of infiltrated Si3N4-10%Al2O3 composite... Development of Si3N4/Al composite by pressureless melt infiltration Akhtar Farid, GUO Shi-ju Institute of Powder Metallurgy, University of Science and Technology Beijing, Beijing 100083, China......
Li+ extraction/adsorption properties of Li-Sb-Mn composite oxides in aqueous medium MA Li-wen, CHEN Bai-zhen, SHI Xi-chang, ZHANG Kun School of Metallurgical Science and Engineering, Central South University, Changsha 410083, China Received 12 July 2010; accepted 9 October 2010 Abstract: Series Li-Sb-Mn composite oxides with different Sb/Mn molar ratios were obtained by solid state reaction......
. The micro-hardness depth profile of the target laser cladding composite coating was characterized by gradient distribution, which could be related to the gradient distribution of the hard SiC...Characterization of Gradient Ni-Fe/SiC Composite Coating on Mild Steel by Thermal Spraying in Combination with Laser Cladding Fu Yongqing1,Xie Changsheng2,Wang Aihua2,Pan Lin3,Hu Mulin2......
, photoluminescence(PL) spectroscopy and BET surface area measurements. The photocatalytic oxidation ability of the novel composite photocatalyst was evaluated using methyl orange(MO) as a target...Visible Light-induced Cr-doped SrTiO3-g-C3N4 Composite for Improved Photocatalytic Performance杨明1,JIN Xiaoqi21. School of Transportation, Southeast University2. Bio-Chemistry Department, Wenshan......
target decision-making (GTDM) theory and non-equidistant (NE) model. Firstly, the influencing factors on the energy demand were forecasted. Secondly, according to the predicted results, the influencing factors of every year were considered in grey measure calculation. The improved grey target decision was analyzed, and the results were corresponded to the energy demand. The law between the energy......