共搜索到21107条信息，每页显示10条信息，共2111页。用时：0小时0分0秒375毫秒

• 烧结工艺对NiFe₂O₄陶瓷纯度和相对密度的影响

  AI导读

  来源： 《机械工程材料2014年第3期》——林启权 黄伟 董文正 朱远志 姜滔

  烧结工艺对NiFe2O4陶瓷纯度和相对密度的影响林启权1,黄伟1,董文正1,朱远志2,姜滔11. 湘潭大学机械工程学院2. 武汉科技大学材料与冶金学院摘 要:采用粉末冶金固相烧结法合成了NiFe2O4陶瓷,研究了烧结温度和保温时间对其纯度和相对密度的影响.结果表明:随着烧结温度的升高和保温时间的延长,NiFe2O4的纯度增大;在1 100℃保温2h即可合成纯度较高的NiFe2O4陶瓷;提高烧结温度和延长保温时间均有利于NiFe2O4陶瓷的致密化;在1 200℃保温2h是制备NiFe2O4陶瓷的较佳工艺.关键词:NiFe2O4陶瓷;烧结温度;保温时间;纯度;相对密度;......

• Fe₂B-Mo₂FeB₂基金属陶瓷的显微组织与性能

  AI导读

  来源： 《中国有色金属学报2015年第4期》——魏祥 陈志国 黄奇胜

  of Fe2B-Mo2FeB2 based cermets WEI Xiang1, CHEN Zhi-guo1, 2, HUANG Qi-sheng1 (1. School of Materials Science and Engineering, Central South University, Changsha 410083, China; 2. Department of Mechanical and Electrical Engineering, Hunan University of Humanities, Science and Technology, Loudi 417000, China) Abstract: The microstructures and properties of Fe2B-Mo2FeB2 based cermets were investigated by means......

• VISCOSITIES OF LIQUID Pd-Si BASED ALLOYS

  AI导读

  来源： 《中国有色金属学报(英文版)1992年第3期》——Guo Wenquan Wang Jingtang

  ......

• Nanowear of a Zr Based Bulk Metallic Glass/Nanocrystalline Alloy

  AI导读

  来源： 《材料热处理学报2004年第5期》——CHU Wu-yang LI Jin-xu LIANG Song

  Nanowear of a Zr Based Bulk Metallic Glass/Nanocrystalline Alloy CHU Wu-yang1,HE Jian-ying1,SUN Dong-bai1,LI Jin-xu1,LIANG Song1,QIAO Li-jie1 (1.Department of Materials Physics and Chemistry...:Zr based bulk metallic glass; partial crystallization; nano-scratch; nano-wear; [全文内容正在添加中] ......

• SiC晶须增强NiFe2O4基惰性阳极材料烧结工艺研究

  AI导读

  来源： 《功能材料2005年第4期》——刘宜汉 姚广春 张淑婷

  SiC晶须增强NiFe2O4基惰性阳极材料烧结工艺研究 刘宜汉1,姚广春1,张淑婷1 (1.东北大学,材料与冶金学院,辽宁,沈阳,110004) 摘要:为改善铝电解惰性阳极用NiFe2O4尖晶石材料存在的不足,首次采用固态合成法制备了NiFe2O4/SiCw复合材料.利用扫描电子显微镜观察显微组织,由X射线衍射分析物相,研究了烧结温度和保温时间对体积密度,气孔率和微观结构的影响,通过DTA分析证明了低于1200℃时NiFe2O4与SiC的热力学相容性,试验结果表明,当烧结温度为1180℃时试样微观结构最为均匀致密,当烧结时间＞6h时密度和气孔率的变化趋于稳定,NiFe2O4/SiCw复合材料最佳的烧结工艺为1180℃×6h. 关键词:铝电解; 惰性阳极; 显微结构; 烧结工艺; [全文内容正在添加中] ......

• Microstructure Development of Directionally Solidified Nb-Ti-Si Based Ultrahigh Temperature Alloy

  AI导读

  来源： 《稀有金属材料与工程2009年增刊第3期》——Guo Haisheng Guo Xiping Yao Chengfang

  Microstructure Development of Directionally Solidified Nb-Ti-Si Based Ultrahigh Temperature Alloy () 摘要:Integrally directional solidification of an Nb-Ti-Si based ultrahigh temperature alloy..., and the cellular solid/liquid interface formed when the withdrawing rate was 5 μm/s. 关键词:integrally directional solidification; Nb-Ti-Si based ultrahigh temperature alloy; directionally solidified......

• Formation of layer-shaped pores in TiC-Fe cermet by combustionsynthesis

  AI导读

  来源： 《中国有色金属学报(英文版)2001年第5期》——范群成 柴惠芬 金志浩

    ......

• Modeling and motion control simulation of tendon based parallel manipulator translation mechanism for sensor based high value waste processing

  AI导读

  来源： 《中南大学学报(英文版)2011年第6期》——黄赳 T. Pretz 卞正富

  J. Cent. South Univ. Technol. (2011) 18: 1953-1961 DOI: 10.1007/s11771-011-0928-7 Modeling and motion control simulation of tendon based parallel manipulator translation mechanism for sensor based... based on one degree of freedom (DOF) tendon based parallel manipulator (TBPM) for high value waste processing was presented and designed. In order to control the motion of loads, nonlinear state feed......

• Microstructure of TiAl/TiC cermet joint bonded by combustion synthesis

  AI导读

  来源： 《中国有色金属学报(英文版)2005年第z3期》——曹健 冯吉才 李卓然

  ......

• Quadrant based incremental planning for mobile robots

  AI导读

  来源： 《中南大学学报(英文版)2014年第5期》——P. Raja M. Abhilash K. Ravi Shankar Alameluvari Adarsh

  Quadrant based incremental planning for mobile robotsP. Raja, M. Abhilash, K. Ravi Shankar, Alameluvari Adarsh(School of Mechanical Engineering, SASTRA University, Thanjavur 613401, Tamilnadu, India... with the improved artificial potential field (iAPF) algorithm shows that the proposed algorithm yields shorter path length with less computation time.Key words:mobile robots; incremental planning; quadrant based......