共搜索到13160条信息,每页显示10条信息,共1316页。用时:0小时0分0秒344毫秒
Debinding of stainless steel foam precursor with 3-D open-cell network structure LI Chang-lin(李昌林), WANG Hui(王 辉), ZHOU Xiang-yang(周向阳), LI Jie(李 劼), LIU Hong-zhuan(刘宏专) School of Metallurgical Science and Engineering, Central South University, Changsha 410083, China Received 13 July 2009; accepted 25 May 2010 Abstract: The thermal debinding behavior of stainless steel foam......
of H0Cr17Ni6Mn3 steel wires and 1Cr18Ni9 stainless steel wires were reduced by 33% and 45%, respectively, and their work-hardening coefficients were reduced by 41% and 47%, respectively. It was also... frequency.`` Key words:electroplasticity; work-hardening; austenite stainless steel wire; [全文内容正在添加中] ......
Microstructure Evolution and Cracking Control of 316L Stainless Steel Manufactured by Multi-layer Laser Cladding HU De-jin1,SUN Kang-kai1,DENG Qi-lin1,SONG Jian-li1,ZHOU Guang-cai1 (1.School..., the microstructure evolution and properties of 316L stainless steel deposited with this technology was investigated, compact components with properties similar to the as-cast and wrought annealed......
Ionic bombardment of stainless steel by nitrogen and nickel ions immersion XIONG Ling(熊 玲)1, HU Yong-jun(胡永俊)2, XU jian(徐 建)1, MENG Ji-long(蒙继龙)1 1. College of Materials Science and Engineering...; Abstract: A new nitriding process was used to carry out the ionic bombardment, in which nickel ion was introduced. The microstructure, composition and properties of the treated stainless steel were studied......
Microstructures and Mechanical Properties of Vacuum Brazed Ti3Al/TiAl Joints Using Two Ti-based Filler MetalsH.S.Ren1,2,H.P.Xiong2,B.Chen2,S.J.Pang1,B.Q.Chen2,L.Ye21. Department of Material Science.... The (Ti)3Al/Ti Al joint brazed with Ti-Zr-Cu-Ni-Fe filler exhibited a lower hardness than that brazed with Ti-Cu-Ni filler. The corresponding joints brazed at 950 °C for 5 min presented the shear......
Nickel-coated Steel Stud to Aluminum Alloy Joints Made by High Frequency Induction Brazing葛佳棋,王克鸿,ZHANG Deku,WANG JianSchool of Material Science and Engineering, Nanjing University of Science and Technology摘 要:Nickel-coated 45 steel studs and 6061 aluminum alloy with 4047 Al alloy foil as filler metal were joined by using high frequency induction......
......
......
GROWTH PROCESS OF LOW-TEMPERATURE PLASMA-NITRIDING LAYER ON AUSTENITIC STAINLESS STEEL X.L.Xu1,Z.W.Yu1,J.B.Qiang2,L.Wang1 (1.Dalian Maritime University,Dalian 116026,China;2.Dalian University... responsible for the increase in layer hardness. Key words:austenitic stainless steel; plasma nitriding; slip band; [全文内容正在添加中] ......
J. Cent. South Univ. (2018) 25: 1862-1869 DOI: https://doi.org/10.1007/s11771-018-3875-8 Investigation of modeling on single grit grinding for martensitic stainless steel NIE Zhen-guo(聂振国)1, 2, 3... steel Cite this article as: NIE Zhen-guo, WANG Gang, JIANG Feng, LIN Yong-liang, RONG Yi-ming. Investigation of modeling on single grit grinding for martensitic stainless steel [J]. Journal of Central......