共搜索到655条信息，每页显示10条信息，共66页。用时：0小时0分0秒656毫秒
and grout flow on soil physical and mechanical properties in jet grouting operations[J]. International Journal of Rock Mechanics & Mining Sciences, 2009, 23(46): 498-505. [9] ZOU D H S, CHENG J, YUE......
. New York: Springer-Verlag Inc., 1992: 270–310. [21] YANG Peng, LIU Ying-wen, ZHONG Ge-yu. Prediction and parametric analysis of acoustic streaming in a thermo acoustic Sterling heat engine with a jet......
of science and engineering, including plasma’s magnetic behavior in fusion reactors, petroleum industries, MHD generators, electric motors, jet printers, electromagnetic casting, crystal growth......
. Theoretical and numerical investigation on rock fragmentation under high-pressure water-jet impact[J]. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 2017, 41(3): 305-315. [15..., LIU Songyong, et al. Numerical simulation of rock fragmentation under the impact load of water jet[J]. Shock and Vibration, 2014, 2014: 1-11. [17] ZHU Zheming. Numerical prediction of crater blasting......
] DREXLER J M, GLEDHILL A D, SHINODA K, VASILIEV A L, REDDY K, SAMPATH M S, PADTURE N P. Jet engine coatings for resisting volcanic ash damage [J]. Adv Mater, 2011, 23: 2388-2388. [13] RAMASWAMY P......
. And the resistivity value was 3.7×10-6 Ω·cm, when it was sintered at 100 °C for 30 min. The conductive ink prepared can be used for the field of printing electronics as ink-jet printing ink. Key words... excellent electrical conductivity even though they are sintered at relatively low temperatures. The conductive ink prepared herein can be used for the field of printing electronics as ink-jet printing......
coatings on glass substrates from hexamethyldisiloxane using a kHz-powered plasma jet[J]. Surface and Coatings Technology, 2019, 361: 377-385. [32] OTAMIRI J C, ANDERSSON S L T, ANDERSSON......
.%, and when being heated to 600 °C, the volatile content was 21.1 wt.%) [13]. The MMS Martian soil simulant was developed by the Jet Propulsion Laboratory, California Institute of Technology......
inrush occurred from blast holes in the left side of ventilation incline face XJK0+101; the jet distance was approximately 4 m; and the inflow of water was 64 m3/h, as shown in Figure 6(a). Until August 30......
microscope (TEM), the longitudinal section samples with a thickness of 0.4 mm were cut from the sheets. After being ground to 30-50 μm, the samples were then thinned to perforation using the twin jet......
