共搜索到689条信息,每页显示10条信息,共69页。用时:0小时0分0秒734毫秒
FE-SEM, gas adsorption and helium pycnometry"[J]. Marine and Petroleum Geology, 2016, 77: 247-261. [30] 张慧, 林伯伟, 卞建玲, 等. 富有机质海相与陆相页岩的对比研究: 以南方早古生代和华北石炭-二叠纪页岩为例[J]. 煤田地质与勘探, 2018, 46(6): 88-95. ZHANG... reflectance Ro and rock mineral composition. Secondly, the morphological characteristics of shale pores were observed visually by Ar-SEM(argon ion polishing scanning electron microscopy). Thirdly, the shale......
scanning electron microscope (FE-SEM) equipped with electron back-scattered diffraction (EBSD) attachment operated at an accelerating voltage of 15 kV. The specimens for EBSD investigation were... temperature for 7 d. The samples were examined by scanning electron microscopy (SEM), model TESCAN VEGA with voltage of 20 kV. Also, in order to obtain a localized chemical analysis from the inside......
(FE-SEM) operated at 15 kV using the TSL OIMTM system. The measured positions were along the line with 0.5 mm from the top surface and arranged every 1 mm from the center to the AS and the RS... (FCC) and body-centered cubic (BCC) metals (Al, Cu, Fe, etc.), which have multiple activated slip systems during the plastic deformation, the previous studies mainly focused on the inhomogeneity caused......
characterization Surface morphologies of the obtained coatings were observed using field-emission scanning electron microscopy (FE-SEM, Nova NanoSEM 450, USA). The composition of element... diffraction (XRD), scanning electronic microscopy (SEM), Fourier transform infrared spectrophotometry (FT-IR) and X-ray photoelectron spectroscopy (XPS). The corrosion resistance of the coated samples......
;nm particle size). The microstructure of sintered samples was observed with a Tescan MIRA 3 LMU field emission scanning electron microscope (FE-SEM) coupled with an energy dispersive X-ray spectrometer... by dilatometry and the resulting microstructure was observed by scan electron microscopy (SEM) and computed microtomography (CMT), while the mechanical properties and corrosion resistance were evaluated......
were observed using electron probe microanalysis (EPMA, JXA-8230, Japan) and field emission scanning electron microscope (FE-SEM, Sirion 200, America) outfitted with energy- dispersive spectroscopy (EDS) detector. The morphology and distribution of the TiB2 particles were observed using metallographic microscope (POLYVAR-MET, Denmark), scanning electron microscope (SEM, Quanta-200, Holland......
spectrometry (Optima 5300DV, USA). Particle morphology was analyzed by thermal field-emission scanning electron microscope (FE-SEM, JSM-7001F). Particle size distribution was measured using Mastersizer... by sodium cations. Al in the spent cathode powder will inevitably be substantially dissolved into the leachate together with Li, Fe, and P during the acid leaching if the leaching is not carefully......
) SEM system (TESCAN MIRA3) equipped with the Oxford EBSD system (AZtec Nordlys Max3) and the EDS (AZtec X-MaxN80) system. Post-mortem on all the deformed specimens was conducted through the FE-SEM... and to develop constitutive models [7-9]. CHEN et al [10] found that the flow behavior of the SiC/8009Al composite was attributed to the intense dynamic recovery caused by the fine Al12(Fe,V)3Si......
in the fabrication of SLM Ti52.4Al42.2Nb4.4Mo0.9B0.06(TNM)/Al-12Si composites [94] and SLM Al-Fe-Cr quasicrystal (QC)/CP-Al composites [95]. Fig. 5 BSE-SEM micrographs for SLM Al-xCu alloys It should... emission (FE)-SEM images revealed that the TiC particles distribute disorderly in the matrix when the volumetric energy density is low (Fig. 9(a)). With increasing the EV, the TiC particles tend to exhibit......