共搜索到11445条信息，每页显示10条信息，共1145页。用时：0小时0分0秒546毫秒
microscope(FESEM) (JSM-6700F) was used to observe the morphology of coating surface. Fig.1 Schematic diagram of mechanical attrition electroplating device: 1 DC power; 2 Anode; 3 Cathode (Carbon steel...; Abstract: The compact Cu coating with smooth surface and refined grain was prepared at high current density by mechanical......
......
increasing the kinetics of lithium/sodium storage;2) carbon coating to form a well conductive network and protect NaTi2(PO4)3 from the erosion of electrolyte and alleviate the crystal expansion... and the turbid solution was refluxed at 80 °C for 5 h. Finally, the solvent was evaporated at that temperature and brown powder was obtained. 2.1.3 Carbon coating with phenolic resin Phenolic resin......
J. Cent. South Univ. (2018) 25: 1642-1650 DOI: https://doi.org/10.1007/s11771-018-3856-y Photo oxidation of DBT using carbon nanotube titania composite as visible light active photo catalyst... way to decrease the recombination rate is to combine carbon nanotubes with a semiconductor. In this work, multiwall carbon nanotube (MWCNT) / titania composites were prepared with different mass......
Effect of Anodization on the Graphitization of PAN-based Carbon Fibers of PAN-based Carbon Fibers贺冬枚,蔡青云State Key Laboratory of Chemo/Biosensing and Chemometrics,College of Chemistry and Chemical Engineering,Hunan University摘 要:One-step pretreatment,anodization,is used to activate the polyacrylonitrile (PAN)-based carbon fibers instead of the routine......
J. Cent. South Univ. Technol. (2010) 17: 1-6 DOI: 10.1007/s11771-010-0001-y Improved oxidation resistance of chemical vapor reaction SiC coating modified with silica for carbon/carbon composites...; Abstract: To protect carbon/carbon (C/C) composites from oxidation, a SiC coating modified with SiO2 was prepared by a complex technology. The inner SiC coating with thickness varying from 150 to 300......
carbon steel (AISI1045) and ultra low carbon bainite steel. To compute the friction coefficient between the coating layer of wire and the surface of die for a specific lubricant, a series of finite element... four kinds of specimens, which consist of a substrate and a coating, as shown in Table 1. As the substrate, ULCB (Ultra low carbon bainite) and AISI1045 were used. ULCB is a non-heat treated steel......
Received 15 July 2007; accepted 10 September 2007 Abstract: Nickel coating deposits with better ductility on a lower carbon steel sheet were produced by electrodeposition method and the electrodeposited... coating; tension deformation; nano-indentation; creep 1 Introduction The nickel electrodeposited carbon steel sheet can be prepared by bilaterally electrodepositing nickel on low carbon steel sheet......
Ablation mechanism of TaC coating fabricated by chemical vapor deposition on carbon-carbon composites LI Guo-dong(李国栋)1, 2 , XIONG Xiang(熊 翔)1 , HUANG Ke-long(黄可龙)2 1. State Key Laboratory.... The results show that the TaC coating is decomposed at the initial stage of laser ablation in atmosphere, and free carbon diffused to the surface, then oxidized to the melt including carbon, oxygen......
-hua, CHEN Wei-xiang, LI Wen-zhu. Electroless plating Ni-P matrix composite coating reinforced by carbon nanotubes[J]. Trans Nonferrous Met Soc China, 2004, 14(4): 681-685. [17] PARK C, OUNAIES Z...]. Carbon, 2003, 41(14): 2855-2863. [22] HERNADI K, LJUBOVIC E, SEO J W, FORRO L. Synthesis of MWNT-based composite materials with inorganic coating[J]. Acta Materialia, 2003, 51(5): 1447-1452. [23......
