共搜索到29683条信息,每页显示10条信息,共2969页。用时:0小时0分0秒255毫秒
Table 2 Technological parameters of process 2 3 Finite element method 3.1 Finite element model The geometric model of the conical thin-walled shell is established in ABAQUS finite element analysis... J. Cent. South Univ. (2019) 26: 3305-3314 DOI: https://doi.org/10.1007/s11771-019-4254-9 Finite element simulation and microstructure of two-pass inner spinning process of curved-generatrix cone......
J. Cent. South Univ. Technol. (2009) 16: 0546-0551 DOI: 10.1007/s11771-009-0091-6 Die design for cold precision forging of bevel gear based on finite element method Jin Jun-song(金俊松)1, Xia... [4-9] studied the closed die forming process by finite element method (FEM). HE et al [10] studied the forming process by experiments. BOCHNIAK et al [11] investigated single warm forging operation......
Modeling texture development during cold rolling of IF steel by crystal plasticity finite element methodA. Kiet TieuSchool of Mechanical, Materials & Mechatronic Engineering, University of Wollongong摘 要:With the consideration of slip deformation mechanism and various slip systems of body centered cubic (BCC) metals, Taylor-type and finite element......
discussing or introducing finite element method for calcu-lating temperature distribution in ceramic body during microwave sin-tering,are not a good many,but it seems that finite element method ismore convenient than finite difference method in dealing with specialor complex geometry of ceramic body.In this paper,we describe a 3D finite element model simulatingthe heating pattern of ceramic......
Finite Element Method Analysis of the Stress for Line Pipe with Corrode Groove During Outdoor StorageZhuanzhao YANG,Daoxin LIU,Xiaohua ZHANGNorthwestern Polytechnical University摘 要:finite element method), and the stress and strain......
Optimal Design of Co/In/Cu Sputtering Target Assembly Using Finite Element Method and Taguchi MethodLin Jiang1,2,Liang Zhang1,3,Zhi-Quan Liu1,21. Institute of Metal Research , Chinese Academy... corresponding to the actual air cooling process were studied, based on fi nite element simulation and Taguchi method, to optimize the sputtering target assembly. Effects of different control factors......
and microstructure during the quenching process for large-sized AISI P20 steel die blocks have been simulated using the finite element method (FEM). The optimum quenching technology of large-sized AISI P20... and properties of the large-sized die blocks. 关键词:quenching technology; finite element method; AISI P20; [全文内容正在添加中] ......
for semi-solid rolling 60Si2Mn was studied by finite element method. Semi-solid 60Si2Mn can be described as compressible rigid visco-plastic porous material saturated with liquid. In terms of ther-mo...Two-dimensional simulation on the rolling process of semi-solid 60Si2Mn by finite element methodRenbo Song, Yonglin Kang, Xueping Ren, Hongbo Dong, and Jiwen WangMaterials Science and Engineering......
Optimization of Processing Parameters for Laser Powder Deposition using Finite Element Method付垚State Key Laboratory of Non-ferrous Metals and Processes, General Research Institute for Non-ferrous...), a finite element model was developed with the help of ANSYS software. The finite element model was verified by the comparison between the experimental results and computed results. Then LPD processes......
mixture for both material evaluation and structural design purpose. Currently, finite element method (FEM) and discrete element method (DEM) are two major numerical methods employed to characterize... Zhen-dong, HU Jing. Fracture properties of epoxy asphalt mixture based on extended finite element method [J]. Journal of Central South University, 2012, 19(11): 3335-3341. [3] KIM Y R, BAEK C......