共搜索到2968条信息,每页显示10条信息,共297页。用时:0小时0分0秒177毫秒
......
......
Bonding properties of interface in Fe/Al clad tube prepared by explosive welding SUN Xian-jun, TAO Jie, GUO Xun-zhong College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China Received 26 October 2010; accepted 11 April 2011 Abstract: A Fe/Al clad tube was prepared by explosive welding. Then the bonding characteristic......
......
Article ID: 1003-6326(2005)03-0497-07 Effect of bonding parameters on microstructure and properties of Si3N4/Si3N4 joint brazed by Cu-Zn-Ti filler alloy ZHANG Jie(张 杰)1... was 15%(molar fraction). The effect of bonding parameters on the microstructure and mechanical properties of the Si3N4/Si3N4 joint were investigated. The results indicate that with increasing brazing......
various surface pre-treating methods. The surface and cross-sectional morphologies of HA coatings were observed by SEM, as well as the bonding strength between coatings and substrates after different pre... the bonding strength reaches (58±5)MPa, higher than that of the clinically used HA coatings on Ti-alloys produced via plasma spray route, as well as a HA coating with full crystallinity and high phase......
Fracture Characteristics of Frit Bonding through In-Situ Nano-Indentation TestingWon Je Jo,Hee-Jun Ahn,Jong Hyoung Kim,Dongil KwonDepartment of Materials Science and Engineering, Seoul National University摘 要:Because frit bonding material is brittle, sudden impacts such as dropping may damage the bonding significantly. Strain-rate-controlled in-situ nano......
the ordered deposition of pyrocarbon and adjust the interface bonding between pyrocarbon and carbon fibers during the infiltration.Key words:carbon nanofiber; SiC nanofiber; pyrocarbon; interface bonding......
Understanding micro-diffusion bonding from the fabrication of B4C/Ni compositesMiao Wang1,2,Wen-xian Wang1,2,Hong-sheng Chen1,2,Yu-li Li1,21. College of Materials Science and Engineering, Taiyuan...">A Ni-B4C macroscopic diffusion welding couple and a Ni-15 wt% B4C composite fabricated by spark plasma sintering(SPS) were used to understand the micro-scale diffusion bonding between metals......
Diffusion Bonding of Al6061 and Cu by Hot Isostatic Pressing滕庆,LI Xiu,WEI QingsongState Key Laboratory of Materials Processing and Die & Mould Technology, School of Materials Science and Technology, Huazhong University of Science and Technology摘 要:Diffusion bonding between Al and Cu was successfully performed by hot isostatic pressing(HIP). To improve......