共搜索到7323条信息,每页显示10条信息,共733页。用时:0小时0分1秒234毫秒
of properties such as higher strength, stiffness, and wear resistance compared to the unreinforced alloys [1]. AMCs can be fabricated by various methodologies like liquid infiltration [2], powder......
digested in microwave furnace by an HF+HNO3 mixture liquid in Teflon bombs at 190 °C for 48 h. The operation was conducted by Perkin Elmer SciexElan 6000. The analytical procedures followed Chinese......
. During this process the cylinder with BCl3 was inserted into the cryostat. The temperature within the range from -69 to -66 °C was obtained by using a liquid nitrogen. This low temperature ensured......
point of water bridge, and β is the solid/liquid contact angle. It is assumed that the capillary pressure acts on the circular section of the narrowest part of the water film, i.e. the corresponding cross......
and GD debris-flow deposits As discussed previously, the matrix of the DYG and SW debris flows is sandy, and that of the JJG and GD debris flows is clayey. The liquid limit (wL), plastic limit (wp......
% and ash content, while the content of fixed carbon (FC) is calculated by subtracting the content of OM and VOM [41, 42]. In the light of the solid-liquid ratio of 1:10, a certain amount of SS......
, viscoplastic ice inclusion, liquid water and gaseous inclusions (water vapor and air). During the long-term evolution of frozen soil, the underground ice layers with the thickness of several meters or even......
- extrusion) is a further development of Conform, and liquid metal in Castex is used to replace solid feedstock in Conform [12-14]. However, little work is available about the combination of Castex and ECAP......
Trans. Nonferrous Met. Soc. China 31(2021) 1303-1321 Processing and characterization of AZ91 magnesium alloys via a novel severe plastic deformation method: Hydrostatic cyclic extrusion compression (HCEC) Armin SIAHSARANI, Ghader FARAJI School of Mechanical Engineering, College of Engineering, Unive......
of cement by XRF analysis (wt%) 2.1.2 Water and pH-adjusting solution Tap water with a pH value of 7 was used to mix the CPB. To exclude external liquid substances, heavy metal ions and sulfate ions were......