共搜索到10271条信息，每页显示10条信息，共1028页。用时：0小时0分0秒347毫秒
of the oxide film was in the range of 5-6 μm. The oxide films were stripped for 2 to 8 min in the solution. Moreover, the effect of the stripping time on the efficiency of the film stripping... revealed. The stripping mechanism was discussed in terms of the dissolution of film delamination. The hydrogen peroxide had a significant effect on the dissolution of the titanium alloy anodic oxide film......
Constructing zwitterionic nanofiber film for anti-adhesion of marine corrosive microorganismsJiashun Shi,Suchun Wang,Xin Cheng,Shiqiang Chen,Guangzhou LiuInstitute of Marine Science and Technology,Shandong University摘 要:A zwitterionic nanofiber film was constructed through combining zwitterionic polymer with anodic aluminum oxide template for anti......
......
Oxidation of Ion Plated Ni-Cr Alloy Film at 300℃王淑荷,陈秀芝,闻立时摘 要:<正> Investigation by using LAS 3000 surfaceanalysis system showed that the oxide of Fe... logarithmically with the time of oxida-tion.The ion plated Ni-Cr alloy film has verydense oxide layer and good oxidation resistance.关键词:......
......
XPS study of BZT thin film deposited on /Ti/SiO2/Si substrate by pulsed laser deposition JIANG Yan-ping(蒋艳平)1, 2, TANG Xin-gui(唐新桂)1, LIU Qiu-xiang(刘秋香)1, CHENG Tie-dong(程铁栋)1, ZHOU Yi-chun(周益春)2... and sensors. Barium zirconate titanate Ba(Zr0.25Ti0.75)O3 thin film was grown on Pt/Ti/SiO2/Si(100) substrates by pulsed laser deposition. Structure and surface morphology of the thin film were studied by X......
Ming-chuan. Synthesis and passive property of nanocomposite Ni-WC coating[J]. Acta Metallurgica Sinica, 2013, 49(10): 1185-1190. Formation and etching of oxide film on nickel surface in discontinuous...; Engineering, Jilin University, Changchun 130025, China; 2. Jilin Core Technology Co. LTD, Changchun 130000, China) Abstract: The formation of oxide film on the nickel surface and the effect of sulfuric......
and 230 mV at 8 mA/cm2, respectively. This composite oxide shows promise as the anodic electrocatalyst for alkaline electrolysis to produce hydrogen. Iron-doped nickel oxide film can be fabricated... widely used to prepare this film, due to the increased adhesion of the film to substrate. In this paper, we describe the development of sputtered iron-doped nickel oxide films used as oxygen......
......
TiO2. However, the film resistivities decreased gradually as the intermixing ratio of IrO2 increased, because IrO2 is a conductive oxide with a lower electrical resistivity of 40 μΩ·cm. Fig.1... Hybrid functional IrO2-TiO2 thin film resistor prepared by atomic layer deposition for thermal inkjet printheads Won-Sub KWACK1, Hyoung-Seok MOON2, Seong-Jun JEONG2, Qi-min WANG1, Se-Hun KWON1 1......
