共搜索到11105条信息,每页显示10条信息,共1111页。用时:0小时0分0秒234毫秒
. X-ray diffraction results indicated that the composite coatings composed of TiCN, TiC, Ti2N,and TiO2 were produced using appropriate techniques. The results indicated that the best condition...LASER CLADDED TiCN COATINGS ON THE SURFACE OF TITANIUM C.S. Liu1,H.S. Kou2,D. Zhang2,Y.L. Yang2 (1.College of Material and Metallurgy, Northeastern University, Shenyang 110004, China;2.College......
Water-Lubricated Ni-Based Composite(Ni-Al2O3,Ni-SiC and Ni-ZrO2)Thin Film Coatings for Industrial ApplicationsRizwan Sarwar Bajwa1,Zulfiqar Khan11. Faculty of Science and Technology,Sustainable... that the wear- and corrosion resistance properties of nickel alumina and Ni-SiC composite coatings significantly improved than that of pure Ni and Ni-ZrO2 coatings.The adhesion and wettability results of Ni-Al2O3......
Ni-P-SiC composite coatings electroplated on carbon steel assisted by mechanical attritionZhaoxia PING 1),Guoan CHENG 1) and Yedong HE 2) 1) Key Laboratory of Beam Technology and Material... of Science and Technology Beijing,Beijing 100083,China摘 要:Ni-P-SiC composite coatings were electroplated on carbon steel substrate assisted by mechanical......
......
Influence of laser scanning speed on Cu-Zr-Al composite coatings on Mg alloysYa-li Gao1,Meng Jie2,Hai-bo Zhang11. School of Mechanical Engineering, Northeast Dianli University2. School of Mechanical...-Al composite coatings on AZ91HP magnesium alloy by laser cladding. The influence of laser scanning speed on the microstructures and properties of the coatings was discussed. The coatings consist......
Wear and Friction Properties of Electrodeposited Ni-Based Coatings Subject to Nano-enhanced Lubricant and Composite CoatingRizwan Bajwa,Zulfiqar Khan,H.Nazir,Vivek Chacko,Adil SaeedNanoCorr, Energy... subject to nano-lubricants with the addition of nano-Al2O3 and graphene and Ni/nano-Al2O3 composite coatings. Electrodeposited coatings were produced by using a pulse electrodeposition method......
The Influence of the Constitution of Acrylate Copolymers on Electrochromic Properties of Their PAn Composite Coatings张超灿摘 要:Several polyacrylate matrixes were prepared with monomers such as methyl methacrylate, KH-570, acrylic acid and butyl acrylate, and the electrochromic behavior of their soluble PAn composite coatings was also studied......
Microstructure and Mechanical Properties of Fe-based Amorphous Composite Coatings Reinforced by Stainless Steel PowdersH.Zhou1,C.Zhang1,W.Wang1,M.Yasir1,L.Liu1,21. School of Materials Science... 要:In this study,a few Fe-based amorphous matrix composite coatings reinforced with various portions(4,8 and16 vol.%) of 31 6L stainless steel powders have......
). However, the presence of Ti3Si(Al)C2 particles disturbed the surface texture of Ni crystallites in the composite coatings. Based on the simulated morphology and the observed microstructure, the mechanisms...="ChDivSummary">Pure nickel and Ni/Ti3Si(Al)C2 composite coatings were prepared by electrodeposition method from an additive-free nickel Watt’s bath and were characterized by X-ray diffraction, laser......
coatings are very smooth. Because of high hardness combined with low friction, the laser cladding composite coating with a mixture of 70% Ni-coated MoS2, 20%TiC and 10% pure Ni powder presents better...Dry wear behaviors of wear resistant composite coatings produced by laser claddingJiang Xu, Wenjin Liu, and Minlin ZhongLaser Processing Research Center, Mechanical Engineering Department, Tsinghua......