共搜索到8268条信息,每页显示10条信息,共827页。用时:0小时0分1秒93毫秒
observation was sliced from semi-solid AZ31-2.0Gd alloy treated at 605 °C for 30 min and was mechanically polished to approximately 70-μm thickness; then, ion beam thinning was used to ensure......
plasma jet combustion. For the numerical works of supersonic combustion, MASUYA et al [27] found that the electron and ion content are relatively small in the plasma jet used in the supersonic......
of 2.1 g picric acid, 5 mL acetic acid and 80 mL ethanol for about 5 s. The EBSD samples were prepared by using the triple ion beam milling system, Leica Em TIC 3X. Samples were installed......
, SCHüTZE M, HORNAUER U, RICHTER E, WIESER E. Improvement of the oxidation resistance of gamma titanium aluminides by microalloying with chlorine using ion implantation [J]. Materials and Corrosion, 1999, 50......
ion implanted titanium [J]. Colloids & Surfaces B: Biointerfaces, 2014, 117: 158-165. [46] HU H, ZHANG W, QIAO Yu-qin, JIANG Xiao-yue, LIU X, DING C. Antibacterial activity and increased bone......
circuit boards[J]. Hydrometallurgy, 2020, 191: 1-10. [7] 徐 涛. 离子交换树脂法吸附,解吸附钯工艺研究[J]. 贵金属, 2016, 37(S1): 102-104. XU Tao. Study on adsorption and desorption of palladium by ion exchange resin[J......
, and graphite by secondary ion mass spectrometry [J]. Metallurgical and Materials Transactions A, 2002, 33(8): 2659-2665. DOI: 10.1007/s11661-002-0387-8. [16] SOFRONIS P, MCMEEKING R M. Numerical analysis......
, 2018, 11: 171. [9] HUANG H H, SHJAU D K, CHEN C S, CHANG J C, WANG S, PAN H, WU F. Nitrogen plasma immersion ion implantation treatment to enhance corrosion resistance, bone cell growth......
investigated using atom probe tomography (APT) (LEAP 3000X HR, Cameca Inc.). APT tips were prepared using the focused ion beam (FIB) technique (FEI Helios Nanolab 600i). The residual stress......
;kV. 7075Al TEM specimens were prepared by first mechanically grinding the samples to a thickness of 20-30 μm, then dimpling to a thickness of about 10 μm, and finally ion-milling to a thickness of electron transparency using a Gatan Precision Ion Milling System with an Ar+ accelerating voltage of 4 kV and a temperature below 35 °C. 1050Al TEM specimens were prepared by first polishing......