共搜索到923条信息,每页显示10条信息,共93页。用时:0小时0分0秒515毫秒
,该合金的最佳均匀化热处理工艺为470 ℃退火16 h. 关键词:Al-Zn-Mg-Zr合金;铸锭;均匀化;显微组织;动力学 中图分类号:TG113.12 文献标志码:A Homogenization treatment... and overburnt temperature of an Al-Zn-Mg-Zr alloy ingot were confirmed by differential scanning calorimetry, the microstructure evolution of the alloy during homogenization was investigated by optical......
:TG457.14;TG113.25;TG113 文献标志码:A 文章编号:1672-7207(2019)05-1042-07 Effect of homogenization on corrosion and fatigue performance of Al-4.46Mg alloy... and Engineering, Central South University, Changsha 410083, China; 3. CRRC Qingdao Sifang Co. Ltd, Qingdao 266111, China) Abstract: The effects of homogenization on corrosion and fatigue performance......
, respectively. The interplane spacings are decreased after the homogenization at 580 ℃ for 240 min, and they are about 2.3328 ? for DC processed A8006 alloy and 2.3293 ? for TRC processed A8006 alloy... samples 4 Discussion A dynamic diffusion process is brought during the homogenization, as source of microsegregation on the interdendritic zones. It can produce a short-range order in the aluminium......
Influence of Rare Earth Modification and Homogenization on the Microstructure and Mechanical Properties of Recycled Can 3004 Aluminum段瑞斌,白培康,YANG Jing,ZHANG Wenda,DING HaoSchool of Materials Science and Engineering, North University of China摘 要:The microscopic structure of waste can aluminum material was researched by adding Al5TiB refining agent, La-Ce......
: The precipitation of Al3Zr particles near grain boundary was significantly different after two kinds of homogenization in the experimental Al-7.81Zn-1.62Mg-1.81Cu (AA7085) alloy. The microstructures, textures and properties of these two specimens were investigated. The results show that staged homogenization can promote Al3Zr particles precipitate in grain boundary areas. The less the Al3Zr particles......
to predict the fraction of the Laves phase dissolution. Finally, the results of diffusion coefficients indicate that the diffusion of Nb element is a critical factor for homogenization process of GH4151 alloy. Key words: GH4151 ingot; homogenization; incipient melting; Laves phase; kinetics 1 Introduction Nickel-based superalloys are important materials used to manufacture the critical components which......
Trans. Nonferrous Met. Soc. China 27(2017) 1476-1482 Microstructural evolution of new type Al-Zn-Mg-Cu alloy with Er and Zr additions during homogenization Hao WU, Sheng-ping WEN, Jun-tai LU, Zhen... Abstract: A comprehensive study on the microstructural evolution of a new type Al-Zn-Mg-Cu-Er-Zr alloy during homogenization was conducted by optical microscope, scanning electron microscope, transmission......
; 文献标志码:A 文章编号:1672-7207(2010)05-1761-06 Predicting electrical conductivity for homogenization of Al-Cu-Mg-Sc-Zr alloy based on BP neural... and Engineering, Southwest Jiaotong University, Chengdu 610031, China) Abstract: The electrical conductivity and the microstructure of Al-Cu-Mg-Sc-Zr alloy under various homogenization conditions were......
Al2Cu and Fe-rich particles are in the ingot. During homogenization, Al3Zr particle precipitates, dissolution and transformation into Al2CuMg of the Mg(Zn, Al, Cu)2 phase occur in the mean time. Except... of the Al3Zr precipitation particles is more homogeneous comparing the two-stage homogenization of 400 ℃/12 h + 470 ℃/12 h with that of 470 ℃/12 h. Key words: Al-Zn-Mg-Cu aluminum alloy......
:TG146 文献标志码:A 文章编号:1672-7207(2017)09-2288-06 Homogenization process and the second phases evolution of 2219..., Central South University, Changsha 410083, China) Abstract: Homogenization process and the second phases evolution of 2219 aluminium alloy treated by ultrasonic were studied by DSC, optical microscope......