共搜索到10312条信息,每页显示10条信息,共1032页。用时:0小时0分0秒265毫秒
中厚板轧机高精度厚度自动控制系统的开发及应用陈跃华1(1.湖北省武汉市中冶南方工程技术有限公司技术研究院)摘 要:为了同时满足同板差和异板差的指标要求,天津天铁冶金集团有限公司轧钢厂中厚板轧机自动厚度控制系统(AGC)分别采用了相对方式AGC和绝对方式AGC,其中,相对方式AGC能有效提高同板差精度,绝对方式AGC则可以保证轧出钢板的厚度与目标厚度基本一致.为此建立了钢板的高精度厚度计式模型,采用X射线测厚仪检测参数和各种补偿算法对计算模型进行修正.这种高精度的AGC系统投入使用后运行稳定,厚度精度取得了满意效......
CT系统空间分辨率测试方法研究进展 倪培君1,郭智敏1 (1.中国兵器科学研究院,宁波分院,浙江,宁波,315103) 摘要:分别从直接测试方法和间接测试方法两方面分析CT系统空间分辨率测试方法的研究进展,综述了两种方法的优缺点和国内外研究现状,介绍一种测试CT系统空间分辨率的新方法,并对该领域的研究和发展趋势作了简要的阐述和展望.最后,介绍一种测试空间分辨率的新方法:数字化标准试件和自动分析软件技术. 关键词:调制传递函数; 点扩散函数; 线扩散甬数; 边界响应函数; 数字化标准试件; modulation transfer function; point spread function; line spread function; edge response function; digital test objects; [全文内容正在添加中] ......
Trans. Nonferrous Met. Soc. China 22(2012) s472-s478 Superplastic forming Ti-6Al-4V titanium alloy cylinder with near uniform thickness distribution JIANG Shao-song1, LU Zhen1, HE Xiao-dong2, WANG.... The influence of surface friction of pre-forming die and final forming die on final thickness distribution was analyzed. The results show that the thinning of the blank near the periphery and the bottom......
show that inverter switching signals are generated by carrier phase-shifted pulse width modulation method, and thus the torque and stator flux amplitude ripples are reduced. The closed-loop control system has excellent dynamic and static performance. Key words: asynchronous machine; direct torque control; active disturbance rejection control; cascaded multilevel inverter; pulse width modulation......
多相场法研究层片厚度对三维共晶层片生长的影响杨玉娟1,严彪1(1.上海市同济大学材料科学与工程学院上海市金属功能材料开发应用重点实验室)摘 要:利用KKSO多相场模型,研究CBr4-C2Cl6过共晶合金,当层片间距为4.1μm时,层片厚度对三维共晶层片生长过程的影响.研究表明层片厚度对三维共晶层片生长影响显著,厚度效应有可能导致层片取向的垂直偏转和倾斜偏转.层片厚度比较小时,共晶层片以类似于二维的1λ振荡形式生长;当层片厚度大于6.4μm以后,层片开始偏转,并最终在横截面上垂直于初始层片方向;层片厚度在8.6~......
无钟炉顶布料操作批重特征数的研究杜鹏宇1,程树森2,滕召杰2(1.北京市北京科技大学 冶金与生态工程学院2.北京科技大学 冶金与生态学院,北京 100083)摘 要:针对不同炉料堆角形成不同料层截面,分析不同平台宽度对批重特征数的影响,提出批重特征数在二次料面堆角大于原始料面堆角时,批重特征曲线分为3个区,即激变区,缓变区和微变区,特征曲线呈下降趋势;在二次料面堆角小于原始料面堆角时,批重特征曲线无明显分区特征,特征曲线呈指数上升趋势.采用1∶10高炉比例模型,研究堆角变化对料层截面的影响,确定了炉料堆角是批重......
油膜轴承变形和压力分析1,1,1(1.达涅利油膜轴承公司)摘 要:轧机油膜轴承最新试验结果表明,实测油膜厚度比计算机模型预测值大35倍.这意味着,油膜厚度增加是由于锥套和衬套变形的结果,这种变形会导致锥套和衬套压力场扩大,进而导致油膜厚度增加.如果油膜厚度真的比预想的高35倍,则不但可以充分利用轴承固有的安全系数,而且还可以提高轴承的最大运行负荷.为确认试验结果,DanOil油膜轴承工程师构建了因液体动压场变化而导致的锥套变形模型,然后将这种变形用于复杂的计算机轴承模拟程序,来计算新的压力场.对压力场和锥套变形......
simulation of the ice thickness, ice growth rate and factors influencing them. The validity of the model was verified by comparing the experimental results in which ice slurry was generated in the ethylene glycol solution with simulation results. Then, the model was used to analyze the influence of the additive type and concentration, flow rate on the growth rate and thickness of ice layer......
宽厚板轧机变斜率头部厚度补偿模型及应用张宏昌1,赵卫国2,杜建斌1,张帅2,潘海波2,相聪2,王振忠2,吴尚超2(1.河北省邯郸市河北钢铁集团有限公司邯钢公司中板厂2.河北钢铁集团有限公司邯钢公司,河北邯郸 056003)摘 要:宽厚板轧制时,钢板头部咬入冲击将对轧机弹跳产生影响,若不采取补偿措施,头部厚度将超差严重.邯郸钢铁集团有限责任公司3 500 mm轧机原来虽采用了三角形头部厚度补偿模型,但头部厚度超差仍达0.5 mm左右.通过对钢板头部厚度数据的分析,找出了头部厚度波动规律,提出了变斜率头部厚度补偿改......
Coating thickness control in continuously fabricating metallic glass-coated composite wiresBao-yu Zhang,Xiao-hua Chen,Zhao-ping Lu,Xi-dong HuiState Key Laboratory for Advanced Metals and Materials.... The effects of processing parameters, including the drawing velocity and coating temperature, on the coating thickness were investigated. It is found that the coating thickness increases......