共搜索到6075条信息，每页显示10条信息，共608页。用时：0小时0分0秒812毫秒
Stress-corrosion behavior and characteristics of the friction stir welding of an AA2198-T34 alloyQuan-qing Zeng1,2,Song-sheng Zeng1,3,Dong-yao Wang1,21. Research Institute of Light Alloy, Central...="ChDivSummary" name="ChDivSummary">To better understand the stress-corrosion behavior of friction stir welding(FSW), the effects of the microstructure on the stress-corrosion behavior of the FSW in a 2198-T34......
Mechanical properties and microstructure analysis of refilling friction stir welding on 2219 aluminum alloyPeilin LI 1), Zhongfeng XU 1), Chun YU 1,2), Hao LU 1,2) Junshan YAO 3) and Guoyu CHEN 3)( 1...) Shanghai Aerospace Equipments Manufacture, Shanghai 200240, China)摘 要:The 2219 aluminum alloy under refilling friction stir welding (RF-FSW......
Microstructure and mechanical properties of friction stir welding of AZ31B magnesium alloy added with cerium于思荣1,陈显君1,黄志求1,2,刘耀辉11. Key Laboratory of Automobile Materials (Jilin University),Ministry...">The AZ31B magnesium alloy sheet added with 0.5 wt.% Ce was welded with friction stir welding(FSW).The microstructures and mechanical properties of the welded joint were investigated.The results showed......
100083, China Received 28 July 2006; accepted 15 September 2006 Abstract: Friction stir welding (FSW) is a new and promising welding processing that can produce low-cost and high-quality joints... strength and Vickers hardness of the welded joint. Key words: 2024-T4 aluminum alloy; friction stir welding; microstructure; tensile properties; Vickers hardness; EBSD; low angle boundary 1......
Optimum condition by mechanical characteristic evaluation in friction stir welding for 5083-O Al alloy Min-Su HAN1, Seung-Jun LEE1, Jae-Cheul PARK1, Seok-Cheol KO2, Yong-Bin WOO1, Seong...; Abstract: The mechanical characteristies for friction stir welding (FSW) of 5083-O Al alloy were evaluated. The results show that in FSW at 800 r/min and 124 mm/min, a weld defect......
properties of copper subjected to friction stir welding(FSW) was investigated.Liquid N2 cooling was conducted to control the cooling rate after the FSW.The obtained results demonstrate that the Z parameter...Effect of Zener-Hollomon Parameter on Microstructure and Mechanical Properties of Copper Subjected to Friction Stir WeldingNan Xu,Ruo-Nan Feng,Wen-Feng Guo,Qi-Ning Song,Ye-Feng BaoCollege......
识码: A Microstructures and properties of joint by friction stir welding for H62 brass alloys WANG Xi-jing1, DA Chao-bing1, 2, LI Jing1, ZHANG Zhong-ke1 (1. State Key Laboratory of Gansu Advanced... in friction stir welding was investigated. The influence of welding parameters on the microstructures and properties of joint was also studied. The results show that good microstructures......
Dissimilar Joining of Pure Copper to Aluminum Alloy via Friction Stir WeldingFarhad Bakhtiari Argesi,Ali Shamsipur,Seyyed Ehsan MirsalehiDepartment of Mining and Metallurgical Engineering,Amirkabir University of Technology摘 要:In this study, the dissimilar friction stir welding(FSW) butt joints between aluminum alloy 5754-H114 and commercially pure......
Effect of intermetallic compounds on the fracture behavior of dissimilar friction stir welding joints of Mg and Al alloysAmir Hossein Baghdadi1,Zainuddin Sajuri1,Nor Fazilah Mohamad Selamat1,Mohd... properties of welded samples by preventing the fracture location at the Mg/Al interface. Friction stir welding was performed to join Mg to Al at different rotational and travel speeds. The microstructure......
Effects of Welding and rotational speeds on the Microstructure and Hardness of Friction Stir Welded Single-Phase BrassSajjad Emami,Tohid SaeidMaterials Engineering Faculty, Sahand University of Technology摘 要:This study focuses on the effects of rotational and welding speeds on the microstructure and hardness of joints in friction stir welded single......
