Effect of cerium oxide prepared under different hydrothermal time on electrocatalytic performance of Pt-based anode catalysts
来源期刊：Journal of Rare Earths2020年第4期
论文作者：Ruihua Guo Jie Wang Shengli An Jieyu Zhang Guozhi Zhou Lele Guo
文章页码：384 - 394
摘 要：In this paper,CeO2 with a pore size of 2-4 nm was synthesized by hydrothermal method.The CeO2 modified graphene-supported Pt catalyst was prepared by the microwave-assisted ethylene glycol reduction chloroplatinic acid method,and the effect of the addition of CeO2 prepared by different hydrothermal reaction time on the catalytic performance of Pt-based catalysts was investigated.The microstructures of CeO2 and catalysts were characterized by X-ray diffraction（XRD）,X-ray photoelectron spectroscopy（XPS）,specific surface area and pore size analyzer（BET）,scanning electron microscopy（SEM） and electron spectroscopy（EDAX）,transmission electron microscopy（TEM）,and the catalysts electrochemical performance was tested by electrochemical workstation.The results show that the catalytic performance of the four catalysts with CeO2 is better than that of the catalyst without CeO2.Adding CeO2 with a specific surface area of 120.15 m2/g prepared by hydrothermal reaction time of 39 h to Pt/C synthesis catalyst,its electrocatalytic performance,stability and resistance to poisoning are the best.The electrochemical active surface area is 102.83 m2/g,the peak current density of ethanol oxidation is 757.17 A/g and steady-state current density of 1100 s is 108.17 A/g which shows the lowest activation energy for ethanol oxidation reaction.When the cyclic voltammogram is scanned for 500 cycles,the oxidation peak current density retention rate is 87.74%.
Ruihua Guo1,2,3，Jie Wang1,3，Shengli An1,3，Jieyu Zhang1，Guozhi Zhou1，Lele Guo1,3
1. School of Material and Metallurgy,Inner Mongolia University of Science&Technology2. College of Materials Science and Engineering,Shanghai University3. Inner Mongo lia Key Laboratory of Advanced Ceramic Materials and Devices
摘 要：In this paper,CeO2 with a pore size of 2-4 nm was synthesized by hydrothermal method.The CeO2 modified graphene-supported Pt catalyst was prepared by the microwave-assisted ethylene glycol reduction chloroplatinic acid method,and the effect of the addition of CeO2 prepared by different hydrothermal reaction time on the catalytic performance of Pt-based catalysts was investigated.The microstructures of CeO2 and catalysts were characterized by X-ray diffraction（XRD）,X-ray photoelectron spectroscopy（XPS）,specific surface area and pore size analyzer（BET）,scanning electron microscopy（SEM） and electron spectroscopy（EDAX）,transmission electron microscopy（TEM）,and the catalysts electrochemical performance was tested by electrochemical workstation.The results show that the catalytic performance of the four catalysts with CeO2 is better than that of the catalyst without CeO2.Adding CeO2 with a specific surface area of 120.15 m2/g prepared by hydrothermal reaction time of 39 h to Pt/C synthesis catalyst,its electrocatalytic performance,stability and resistance to poisoning are the best.The electrochemical active surface area is 102.83 m2/g,the peak current density of ethanol oxidation is 757.17 A/g and steady-state current density of 1100 s is 108.17 A/g which shows the lowest activation energy for ethanol oxidation reaction.When the cyclic voltammogram is scanned for 500 cycles,the oxidation peak current density retention rate is 87.74%.
关键词：
