简介概要

Grain refining of Er added to Ti-22Al-25Nb alloy and morphology of erbium precipitates

来源期刊：Rare Metals2013年第1期

论文作者：Jing-Ru Dai Hui-Min Lu Zhi-Jin Cai Chao An

文章页码：5 - 11

摘要：In order to investigate the effect of erbium （Er） on the microstructure of orthorhombic Ti2AlNb-based alloys, four testing alloys were prepared by adding different contents of the rare earth metal Er to Ti-22Al-25Nb alloy and optical microscopy, X-ray diffraction, scanning electron microscopy, electron probe microanalysis, energy-dispersive spectrometry, and transmission electron microscopy were used. The results show that the addition of Er is capable of grain refining and the refinement effect is more obvious with increasing content of Er. The Er2O3 dispersoids formed by internal oxidation and Al3Er compound particles are observed in Er-doped alloys and the number of Er precipitates is increased with increasing Er addition. It is likely that the solubility of Er in the Ti2AlNb alloy is very low and Er precipitates tend to segregate at grain boundaries, which together with the surface activity of rare earth elements is supposed to decrease the prior B2 grain size of Ti-22Al-25Nb alloy effectively.

Rare Metals 2013,32(01),5-11

Grain refining of Er added to Ti-22Al-25Nb alloy and morphology of erbium precipitates

Jing-Ru Dai Hui-Min Lu Zhi-Jin Cai Chao An

School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics

作者简介：Hui-Min Lu e-mail: lhm0862002@yahoo.com.cn;

收稿日期：22 February 2012

基金：financially supported by the Science and Technology Ministry of China to the National High Technology “863” Project (No. 2012AA062302);

Grain refining of Er added to Ti-22Al-25Nb alloy and morphology of erbium precipitates

Abstract：

In order to investigate the effect of erbium (Er) on the microstructure of orthorhombic Ti2AlNb-based alloys, four testing alloys were prepared by adding different contents of the rare earth metal Er to Ti-22Al-25Nb alloy and optical microscopy, X-ray diffraction, scanning electron microscopy, electron probe microanalysis, energy-dispersive spectrometry, and transmission electron microscopy were used. The results show that the addition of Er is capable of grain refining and the refinement effect is more obvious with increasing content of Er. The Er2O3 dispersoids formed by internal oxidation and Al3Er compound particles are observed in Er-doped alloys and the number of Er precipitates is increased with increasing Er addition. It is likely that the solubility of Er in the Ti2AlNb alloy is very low and Er precipitates tend to segregate at grain boundaries, which together with the surface activity of rare earth elements is supposed to decrease the prior B2 grain size of Ti-22Al-25Nb alloy effectively.

Keyword：

Ti2AlNb-based alloys; Rare earth erbium (Er); Microstructure; Erbium precipitates;

Received： 22 February 2012

1 Introduction

In 1988,Banerjee et al.[1]identified a ternary intermetallic named O-phase(Ti₂Al Nb)with orthorhombic structure for the Ti–25Al–12.5Nb composition.The ordered Ti₂Al Nbbased alloys have received attractive attention as candidate materials for elevated-temperature structural applications due to high strength-to-weight ratio,good creep properties and excellent high-temperature performance[2–9]Ti–22Al–25Nb alloy is one of the promising Ti₂Al Nbbased alloys that have been greatly researched in recent years.Studies have shown that the mechanical properties of Ti₂Al Nb-based alloys are very sensitive to the composition and microstructure,and quaternary element is added to improve microstructure and properties[6–8].Until now several compositions in the range of Ti–22Al–25Nb with Mo,Si,and Zr additions have been researched[10,11]and trace elements of B,Fe,and W have been added to other Ti₂Al Nb-based alloys[12–14].

Owing to unique electronic configuration,rare earths have played an important role in metallurgy and materials,such as refinement of microstructure,alloying or microalloying,and purification of materials and metamorphosis of inclusions[15],consequently resulting in properties improvement.

Recently,minor rare earth elements(REEs)have been well added to intermetallics with the purpose of microstructure modification and property improvement.To our knowledge,there are few reports about Ti₂Al Nb-based alloys with Er.Up to now,studies about Y modified in Ti–17Al–27Nb,Ti–23Al–25Nb,and Ti–16Al–27Nb have been reported,respectively[16–18].Previous research by the authors indicates that the addition of Er has a great refinement effect on the grain size and microstructure of Ti–16Al–27Nb alloy[18].In this article,the influence of Er on the microstructure of Ti–22Al–25Nb alloy and Er precipitates was studied and discussed.

2 Experimental

The nominal compositions of the studied alloys are Ti–22Al–25Nb,Ti–22Al–25Nb–0.4Er,Ti–22Al–25Nb–0.6Er and Ti–22Al–25Nb–0.8Er.All compositions are given in atomic percent.Raw materials are 99.7%titanium sponge,99.99%pure aluminum,99.88%pure niobium,and99.9%pure Er.

Fig.1 Metallographic micrographs of as-cast alloys:a Ti–22Al–25Nb,b 0.4%Er alloy,c 0.6%Er alloy,and d 0.8%Er alloy

The studied alloys were prepared in a nonconsumable electrode arc furnace with a water-cooled copper hearth in an atmosphere of argon.Each alloy button was remelted and turned over for four times to insure chemical homogeneity.

Specimen rods of 13 mm in diameter and 20 mm in length were cut using electrodischarge machine(EDM).The specimen rods were encapsulated in quartz tubing,vacuum pumped to 1.33 9 10^-3Pa,and then back-filled with argon by 2 9 10⁴Pa.These rods experienced solid solution processing plus aging treatment to obtain O?B2duplex microstructure.

The microstructures and phase compositions of the alloy were conducted by optical microscopy(OM),X-ray diffraction(XRD),scanning electron microscope(SEM),electron probe microanalysis(EPMA),and transmission electron microscope equipped with an energy–dispersive spectrometer(TEM–EDS).The samples for metallographic observation were etched in Kroll reagent(HF:HNO₃:H₂O=1:4:5).Ion beam thinning technique was used to prepare TEM samples.

3 Results and discussion

3.1 Effect of Er content on prior B2 grain size

The microstructures of the as-cast alloys are revealed in the optical micrographs presented in Fig.1a–d.As seen in Fig.1a,relatively coarse and nonuniform primary B2grains are observed in non Er alloy when no refinement measure is employed.However,the grain size is decreased gradually when increasing content of REE Er is added Relative small grain size can be observed in 0.8%Er alloy and there is a subtle difference in grain size as well Besides,some black spots appear within grains or along grain boundaries that are supposed to be Er precipitates.

3.2 Phases and microstructures after heat treatment

Analysis of XRD patterns spectrum of the studied alloys after heat treatment shown in Fig.2 reveals that all alloys comprise B2-phase and O-phase.Compared with non Er alloy,some other XRD peaks of O-phase with differen height differences are found.Furthermore,the diffraction perk of Er-rich phase is not detected by XRD with regard to Er-doped alloys,which may be due to its small amount and high dispersion.

Fig.2 XRD patterns of alloys after heat treatment:a Ti–22Al–25Nb,b 0.4%Er alloy,c 0.6%Er alloy,and d 0.8%Er alloy

After solid solution processing plus aging treatment,microstructures of the experimental alloys are shown in Figs.3 and 5a.The multiphase microstructures consist of lathed O-phase and equiaxed O-phase surrounded by a transformed B2 matrix in the non Er alloy(Fig.3),which is consistent with the detecting results of phases by XRD.However,in microstructures of Er-doped alloys,a small amount of discontinuous grain boundary phase is also observed at the prior B2 grain boundary,which is supposed to be a₂phase based on a phase diagram[19].Besides,Er precipitates are found both within grains and on boundaries.In these back-scattered electron images shown in Fig.2,the light,gray,and black regions correspond to the B2,O,and a₂phases,respectively.

As observed in Fig.3,with increasing content of Er addition,the ratio of length to width of lathed O-phase is increased,whereas the amount of equiaxed O-phase is decreased.Certainly,specific data are needed to demonstrate the accuracy of this observation.The presence of a₂at grain boundaries in Er-doped alloys after heat treatment reveals a compositional segregation at the grain boundaries.Furthermore,because a₂phase is not found in non Er alloy after the same heat treatment,it is likely that Er might lower the transition temperature from the O?B2 binary phase area to the O?B2?a₂ternary phase area,which consequently leads to the presence of a₂phase at grain boundaries as observed in the EPMA microstructures of Er-doped alloys shown in Fig.5a.

3.3 Morphology of precipitates

From Fig.3b–d,some white precipitates are observed both within grains and along boundaries in Er-doped alloys.As demonstrated in Fig.3b,most precipitates are ellipsoids and clavate distributing at boundaries,whereas few large particles with irregular shape present within grains in0.4%Er alloy.When it refers to 0.6%Er alloy,not only more precipitates appear but also some discontinuous net of precipitates are also observed,which leads to grain boundary segregation(Fig.3c).In 0.8%Er alloy,a great number of white precipitates in the shape of closed networks appear along grain boundary and grain boundary segregation becomes more severe(Fig.3d).Through these observations,it can approximately infer that Er has a low-level solubility in Ti₂Al Nb-based alloys and tends to segregate at grain boundary to lower free energy of the whole system due to the large radius difference between Er and the other elements[20].However,exact analyses about Er solubility in Ti₂Al Nb-based alloys are required to confirm this preliminary observation.It should also be noted that a lot of fine precipitates in white color are observed at high magnification of electron microscopy(Fig.5a),which also are studied by TEM.Figure 4a–f indicates TEM micrographs of these studied alloys after heat treatment.

Fig.3 BSE micrographs of alloys after heat treatment:a Ti–22Al–25Nb,b 0.4%Er alloy,c 0.6%Er alloy,and d 0.8%Er alloy

These fine particles morphology of better dispersion and ellipse are clearly observable by means of TEM scanning and observing.As seen in Fig.4a–f,although the number of fine precipitates is increased with increasing Er addition,they share the same morphology and uniform distribution.The size of the fine precipitates can be estimated approximately at 120 nm by utilizing statistics method.It can also find that these fine precipitates tend to appear from B2-phase.To explain how these fine precipitates come out,TEM micrographs of as-cast alloys are presented in Fig.4g,h.It seems reasonable that these fine precipitates are formed during aging process for no fine particles in nanometer-scale are found in the as-cast alloys.

3.4 Components analysis of precipitates

The SEM micrographs of Ti–22Al–25Nb–0.6Er alloy after heat treatment showing both submicron precipitates and nanometer particles with white color(Fig.5a,b)illustrate that they both contain heavy REE Er.SEM–EDS and TEM–EDS were used to analyze the phase components of both submicron precipitates and nanometer-scale precipitates,respectively,with the corresponding experimenta results shown in Table 1.Also,the EDX analysis results of precipitates in 0.6%Er alloy shown in Table 1 corresponded to A,B,and C spots in Fig.5.According to the EDX spectrum analysis(Table 1),some precipitates are Er-rich oxides,consisting most of the Er and O.Because the stoichiometric ratio between Er and O is approximately2:3,the chemical formula is supposed to be Er₂O₃.In addition,it seems that the probability that Er₂O₃appears in0.4%Er alloy is higher than both 0.6%Er alloy and0.8%Er alloy.Thus,it can be inferred that the formation of Er₂O₃has occurred first.Figure 5 shows the results of line scan of electronic probe of Ti–22Al–25Nb–0.6Er alloy.It indicates that these big granular precipitates are composed of two elements:Al and Er.It is reasonable that a compound of Al and Er is preferred to form among the Ti–Al–Nb–Er system because the electronegative difference between Al and Er is the largest.The electronegative values of Ti,Al,Nb,and Er are 1.54,1.61,1.6,and 1.24respectively.It could also be concluded that Er mainlyexists in the white precipitated phase for the big atomic number of Er.TEM–EDS results confirmed that those nanometer-scale precipitates have been mainly consisted of Al and Er,with the similar composition with biggish precipitates.Combined with the Al–Er binary alloy phase diagram[21]and the SAED results that the crystal structure of fine precipitated phase is simple cubic with a lattice parameter of 0.4215 nm,it can be concluded that the precipitated phase is Al₃Er phase,which may have precipitated from the matrix during aging treatment comparedwith the TEM microstructures of the as-cast alloys before heat treatment.It is assumed that the formation of these fine Er particles might bring improvement in mechanical property,which will be further investigated.

Fig.4 TEM micrographs of alloy and analysis of fine precipitates.a precipitates in 0.4%Er alloy,b precipitates in 0.6%Er alloy,c precipitates in 0.8%Er alloy,d and e pinning effect of erbium precipitate on triple boundary junctions in 0.4%and 0.6%Er alloys,respectively,f and g images of as-cast alloys,h selected area electron diffraction(SAED)of fine precipitates,and i EDS analysis of fine precipitated phase in(a)–(c)

3.5 Mechanism of grain refinement

The REEs,due to their surface activity,are able to lower the surface tension of liquid metal and thus decrease the fluctuated energy needed for the formation of critical grain nuclei.Consequently,both the probability and the growth rate of nucleation are enhanced.

Fig.5 EPMA images of 0.6%Er alloy after heat treatment:a discontinuous a2phase at grain boundaries,appearances,and distributions of erbium-rich phases,b microstructure,and c line distribution of elements corresponding to b

Table 1 Results of composition analysis of erbium particles appearing in micrographs of experimental alloys(at%) 下载原图

Table 1 Results of composition analysis of erbium particles appearing in micrographs of experimental alloys(at%)

The particles of Al₃Er preferentially precipitated in the process of crystallization,together with impurities O acting as nucleating sites,also contribute to grain refinement.

The existence of nanometer-scale Al₃Er precipitates in Ti–Al–Nb–Er system after heat treatment proves that a small part of Er has once solubilized in the matrix and then decomposed from the matrix.However,most Er with a high-segregation tendency segregates at boundaries during the cooling process and consequently leads to the formation of Al₃Er.The primary Al₃Er precipitates,acting as heterogeneous nucleation site,play an important role in refining grain size.They also function as obstacles to the migration of boundaries.In addition,with increasing content of Er,the shape of Al₃Er phase would transfer from discontinuously distribution to continuously distribution which effectively prevented grain from growing.

It can be concluded that it is the heterogeneous nucleation function and obstruction effect of Al₃Er on grain boundary migration that mainly contribute to the grain refinement in the experimental alloy.

4 Conclusion

Addition of Er to Ti₂Al Nb-based alloys contributes to grain refinement and the refinement effect is gradually obvious with increasing content of Er.

It is likely that Er may lower the transition temperature from the O?B2 binary phase area to O?B2?a₂ternary phase area,as a small amount of discontinuous a₂is observed at the B2 boundary only in Er-doped alloys after heat treatment.

Erbium(Er)has a low-level solubility in Ti₂Al Nb-based alloys and has a high-segregation tendency at grain boundaries

An Er-rich phase named Al₃Er is formed.Primary Al₃Er particles formed during solidification,which act as heterogeneous nucleus and also are capable of impeding boundary movement,play an important role in grain refinement.In addition,Er₂O₃is also formed by interna oxidation.