Effects of the annealing temperature on the structure and up-conversion photoluminescence of ZnO film
来源期刊:JOURNAL OF MATERIALS SCIENCE TECHNOLOG2018年第12期
论文作者:Xiaoqi Meng Changjiang Zhao Boxu Xu Pei Wang Juncheng Liu
文章页码:2392 - 2397
摘 要:The up-conversion film is being tried to increase the photoelectric conversion efficiency of the silicon solar cell. To improve the efficiency of the photoluminescence film, the effects of the annealing temperature were investigated on the structure and photoluminescence of the ZnO up-conversion film, which was prepared using the sol-gel method and the spin-coating technique. The results show that the organic compounds and water in the ZnO film were completely eliminated when the annealing temperature reached 500 ℃. The crystallinity of film is improved and the average grain size continuously increases as increasing the annealing temperature. The transmittance in the wavelength range of 400-2000 nm continuously increases as the annealing temperature increases from 500 ℃ to 700 0 C, whilst it decreases first and then increases as the annealing temperature increases from 800 ℃ to 1000℃. When the film is excited with a laser of 980 nm, there are two intense emission bands in the up-conversion emission spectra, 542-nm green light and 660-nm red light, corresponding to Ho3+:5 S2/5 F4→5 I8 and 5 F5→5 I8 transitions, respectively. In addition, the intensity of up-conversion luminescence for the film increases first and then decreases with the increase of the annealing temperature. When the annealing temperature is at 900 ℃, the film consists of small round compact particles with a high degree of crystallization,reaching maximum up-conversion intensity of the film.
Xiaoqi Meng1,Changjiang Zhao1,Boxu Xu1,Pei Wang2,Juncheng Liu1
1. School of Materials Science and Engineering,Tianjin Polytechnic University2. Auditing Department,Tianjin Polytechnic University
摘 要:The up-conversion film is being tried to increase the photoelectric conversion efficiency of the silicon solar cell. To improve the efficiency of the photoluminescence film, the effects of the annealing temperature were investigated on the structure and photoluminescence of the ZnO up-conversion film, which was prepared using the sol-gel method and the spin-coating technique. The results show that the organic compounds and water in the ZnO film were completely eliminated when the annealing temperature reached 500 ℃. The crystallinity of film is improved and the average grain size continuously increases as increasing the annealing temperature. The transmittance in the wavelength range of 400-2000 nm continuously increases as the annealing temperature increases from 500 ℃ to 700 0 C, whilst it decreases first and then increases as the annealing temperature increases from 800 ℃ to 1000℃. When the film is excited with a laser of 980 nm, there are two intense emission bands in the up-conversion emission spectra, 542-nm green light and 660-nm red light, corresponding to Ho3+:5 S2/5 F4→5 I8 and 5 F5→5 I8 transitions, respectively. In addition, the intensity of up-conversion luminescence for the film increases first and then decreases with the increase of the annealing temperature. When the annealing temperature is at 900 ℃, the film consists of small round compact particles with a high degree of crystallization,reaching maximum up-conversion intensity of the film.
关键词: