简介概要

Analysis of Stored Energy in Cold-Rolled Copper Using Bulk and Microstructure-Based Techniques

来源期刊:Acta Metallurgica Sinica2016年第4期

论文作者:Shan-Quan Deng Andy Godfrey Wei Liu

文章页码:313 - 319

摘    要:Measurements of stored energy have been obtained for samples of copper cold-rolled to von Mises strains between 0.42 and 5.21 using both differential scanning calorimetry(DSC), and based on measurements of microstructural parameters in the transmission electron microscope(TEM). In both cases, a linear increase in stored energy with strain is found. The ratio between the two measured values varies, however, over a significant range, indicating that some caution is needed in determining the relative difference in energy associated with deformation microstructure heterogeneities in a given sample. Comparison of the stored energy with the flow stress suggests that the TEM-based measurements reflect the dislocation density content responsible for the flow stress, but that the DSC technique additionally measures other contributions to the stored energy, such as the presence of balanced internal stresses.

详情信息展示

Analysis of Stored Energy in Cold-Rolled Copper Using Bulk and Microstructure-Based Techniques

Shan-Quan Deng,Andy Godfrey,Wei Liu

Key Laboratory of Advanced Materials (MOE), School of Materials Science and Engineering, Tsinghua University

摘 要:Measurements of stored energy have been obtained for samples of copper cold-rolled to von Mises strains between 0.42 and 5.21 using both differential scanning calorimetry(DSC), and based on measurements of microstructural parameters in the transmission electron microscope(TEM). In both cases, a linear increase in stored energy with strain is found. The ratio between the two measured values varies, however, over a significant range, indicating that some caution is needed in determining the relative difference in energy associated with deformation microstructure heterogeneities in a given sample. Comparison of the stored energy with the flow stress suggests that the TEM-based measurements reflect the dislocation density content responsible for the flow stress, but that the DSC technique additionally measures other contributions to the stored energy, such as the presence of balanced internal stresses.

关键词:

<上一页 1 下一页 >

有色金属在线官网  |   会议  |   在线投稿  |   购买纸书  |   科技图书馆

中南大学出版社 技术支持 版权声明   电话:0731-88830515 88830516   传真:0731-88710482   Email:administrator@cnnmol.com

互联网出版许可证:(署)网出证(京)字第342号   京ICP备17050991号-6      京公网安备11010802042557号