Influence of pH on the Property of Apatite-type Lanthanum Silicates Prepared by Sol-gel Process
来源期刊：Journal Of Wuhan University Of Technology Materials Science Edition2012年第5期
论文作者：施庆乐 张华
文章页码：841 - 846
摘 要：The apatite-type lanthanum silicates with formula La9.33Si6O26 are prepared by sol-gel process. The homogeneity of the sol affected by pH value of the solution is investigated. The viscosity of the sols slightly increases first and then increases abruptly because the predominant reaction mechanism changes from hydrolysis reaction to condensation reaction. In addition, the onset time of the increase for the viscosity shortens from pH 1 to pH 4. The gelation time decreases with increasing pH of the solution. Therefore, the pH of the sols should be less than 4 to form gel. The sol with initial pH 2 shows maximum value of zeta potential and maximum stability. For the sample with initial pH 2, pure apatite-type lanthanum silicates La9.33Si6O26 have been successfully prepared after the dried gel is calcined at 1 000 ℃. In addition, this sample sintered at 1 550 ℃ exhibits the highest ionic conductivity. The activation energies are all less than 0.90 eV.
施庆乐，张华
College of Materials Science and Engineering,Nanjing University of Technology
摘 要：The apatite-type lanthanum silicates with formula La9.33Si6O26 are prepared by sol-gel process. The homogeneity of the sol affected by pH value of the solution is investigated. The viscosity of the sols slightly increases first and then increases abruptly because the predominant reaction mechanism changes from hydrolysis reaction to condensation reaction. In addition, the onset time of the increase for the viscosity shortens from pH 1 to pH 4. The gelation time decreases with increasing pH of the solution. Therefore, the pH of the sols should be less than 4 to form gel. The sol with initial pH 2 shows maximum value of zeta potential and maximum stability. For the sample with initial pH 2, pure apatite-type lanthanum silicates La9.33Si6O26 have been successfully prepared after the dried gel is calcined at 1 000 ℃. In addition, this sample sintered at 1 550 ℃ exhibits the highest ionic conductivity. The activation energies are all less than 0.90 eV.
关键词：
